Your heat pump normally runs two or three times an hour for about 10 to 15 minutes to regulate the temperature of your Gluckstadt, MS, home. If it’s running all the time, this could signal a problem. Let’s look at some common reasons your heat pump runs continuously.
Leaking Refrigerant
Refrigerant helps your system transfer heat between your home and the outside. A low refrigerant level will impair the process, causing the heat pump to run continuously.
Refrigerant lines are a closed-loop system, so low refrigerant results from a leak. Low refrigerant usually indicates cracks or holes in the piping, valves, coils or other locations that require repair.
Reversing Valve Is Stuck
The reversing valve switches the system from heating to cooling. If the valve gets stuck and can’t switch, your home will never reach the desired temperature.
If this is the situation, you’ll notice warm air coming from the registers. The system will run nonstop in an attempt to correct the temperature.
Air Filter Is Dirty
A dirty air filter will interfere with the normal operation of the heat pump. A clogged filter restricts air flow, preventing adequate air cycling through the system. You should change your air filter at least once every two to three months to prevent this problem. Do so more often if you have pets in your house or suffer from allergies.
Dirty Evaporator Coil
Over time, the evaporator coil can develop a coating of dust and grime that will negatively impact its operation. This is because it can’t engage in proper heat transfer, which results in reduced temperature regulation.
A heat pump in Gluckstadt, MS, that always runs is irritating, and it compromises your comfort and runs up your electric bill. Contact Modern Air today so we can repair your heat pump in no time.
Image provided by iStock
